The 3M™ Cold Shrink QS-III Inline Splice Kit is an inline splice for joining 25/28 kV jacketed concentric neutral (JCN) or concentric neutral (CN) power cables. It is a cold shrink design.
The 3M™ Cold Shrink QS-III Inline Splice Kit is a one-piece moulded design made of specially formulated silicone rubbers, while the jacketing is made of EPDM rubber for its special physical properties. Each splice is high-voltage production tested to ensure reliability. Kits can be ordered with connectors packed in the kit or the kit and connector can be ordered as separate items. Meets requirements of IEEE 404. Each kit makes one splice. Note: 5456A-WG, 5457A-WG and 5458A-WG are partially jacketed splices containing built-in bleeder wires. Additional end user materials are required to convert to full jacketing.
Applications | Cable Connection |
Brands | 3M™ |
Case Quantity | 1 |
Conductor Material | Copper, Aluminum |
Connector Included | 10006, 10014, 20009 |
Connector O.D. Range (metric) | 18 - 33 mm |
Insulation O.D. Range (Metric) | 21.3 - 35.1 mm, 27.2 - 43.2 mm, 27.4 - 43.2 mm |
Insulation Outside Diameter Range (metric) | 27.2 - 43.2 mm, 21.3 - 35.1 mm, 27.4 - 43.2 mm |
Maximum Connector Length (metric) | 127 mm (Al), 146 mm (Cu) |
Number of Conductors | 1 |
PILC Cable Insulation O.D. Range (metric) | 20 - 27 mm |
Poly/EPR Cable Insulation O.D. Range (metric) | 22 - 35 mm |
Product Series | 5510A-1T-PILC Series, 5535A & 5536A Series, 5524A, 5525A & 5526A Series, 5513A, 5514A, 5515A & 5516A Series |
Shielding Type | Tape Shield, UniShield®, Longitudinally Corrugated (LC), Wire Shield, PILC |
Splice Type | Inline, Transition |
Voltage | 15 kV, 35 kV, 25/28 kV |
Data Sheets
(PDF, 85KB)
Data Sheets
(PDF, 150KB)
Data Sheets
(PDF, 150KB)
Data Sheets
(PDF, 149KB)