3M™ Cold Shrink Quick Splice Kits QSLV-M Series
- | Select product options for IDs.
Details
Highlights
- Sleeve is made of EPDM rubber which contains no chlorides nor sulfur, sealing mastic provides a water-resistant sealing
- The third, center segment of the core remains inside the cold shrink tube, acting as a support structure
- Open-ended tubular sleeves with a sealing mastic on each end for range taking and water resistant tight seal
- Factory-expanded for easy installation
- For direct-bury, secondary low-voltage, non-shielded cable splices
- Rated for up to 1 kV applications
- Splices both aluminum and copper conductors
- Simple installation which requires no tools
- Offers excellent wet electrical properties and resists water, acids and alkalis
- Withstands temperatures of -40°C to 90°C (-40 °F to 194°F)
- RoHS 2011/65/EU Compliant and ANSI Certified
- Environmental sealing for communication and other non-electrical applications
3M™ Cold Shrink Quick Splice Low Voltage QSLV-M are open-ended tubular rubber sleeves with sealing mastic on each end which are factory expanded and assembled onto a unique three-core system.
Two cores, one on each end, are removed from the 3M™ Cold Shrink Quick Splice Low Voltage QSLV-M insulator once it has been centered over an inline connector, allowing the ends of the tube to shrink and form a water-resistant seal. The third, center segment of the core remains inside the cold shrink tube, acting as a support structure. Sizing of the cores and tube, along with the sealing mastic on each end, is designed to accommodate the variance in connectors and connector crimping techniques and final dimensions without degrading the seal and insulating characteristics of the EPDM rubber tube, while also making core removal easy. Diameter sizes cover a range of 1 kV or less cable from 8 AWG through 1000 kcmil for copper and 8 AWG through 500 kcmil for aluminum conductors with crimped connectors. In aerial applications where intense UV radiation will be common and visual inspection is not possible, it is recommended to overwrap the tubing with Scotch® Super 33+™ Vinyl Electrical Tape or Scotch® Self-Fusing Silicone Rubber Electrical Tape 70. Note: Insulator may be used on cable sizes outside of the recommended range provided both cables are within the insulation O.D. range, and the connector meets the dimensional requirements shown in the table.
Typical Properties
Resources
Related Products
| Voltage | 1 kV | |||
| Number of Conductors | 3 | |||
| Shielding Type | Non-shielded | |||
| Splice Type | Inline | |||
| Insulation Outer Diameter (metric) | 11.176 mm, 11.43 mm, 11.684 mm, 11.938 mm, 10.16 mm, 10.414 mm, 10.668 mm, 10.922 mm, 12.446 mm, 12.7 mm, 12.192 mm, 12.954 mm, 13.208 mm, 14.224 mm, 13.462 mm, 13.716 mm, 13.97 mm, 14.478 mm, 14.986 mm, 15.24 mm, 15.494 mm, 15.748 mm, 14.732 mm, 16.002 mm, 16.256 mm, 16.51 mm, 16.764 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm, 18.288 mm, 18.034 mm, 18.542 mm, 18.796 mm, 19.05 mm, 6.096 mm, 6.35 mm, 6.604 mm, 6.858 mm, 5.08 mm, 5.334 mm, 5.842 mm, 5.588 mm, 7.112 mm, 7.366 mm, 7.62 mm, 7.874 mm, 9.398 mm, 9.652 mm, 9.906 mm, 8.128 mm, 8.382 mm, 8.636 mm, 8.89 mm, 9.144 mm, 19.304 mm, 19.558 mm, 19.812 mm, 25.908 mm, 26.162 mm, 26.416 mm, 26.67 mm, 26.924 mm, 27.178 mm, 22.606 mm, 22.86 mm, 23.114 mm, 23.368 mm, 28.702 mm, 28.956 mm, 28.448 mm, 29.21 mm, 23.876 mm, 24.13 mm, 23.622 mm, 24.384 mm, 31.496 mm, 27.432 mm, 30.988 mm, 31.242 mm, 33.274 mm, 33.02 mm, 33.528 mm, 33.782 mm, 29.464 mm, 34.036 mm, 34.544 mm, 34.29 mm, 21.59 mm, 21.844 mm, 22.098 mm, 22.352 mm, 29.718 mm, 29.972 mm, 30.48 mm, 30.734 mm, 30.226 mm, 31.75 mm, 32.004 mm, 32.258 mm, 32.512 mm, 32.766 mm, 27.686 mm, 27.94 mm, 28.194 mm, 24.638 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 20.066 mm, 20.32 mm, 20.574 mm, 20.828 mm, 21.082 mm, 21.336 mm, 39.37 mm, 39.624 mm, 39.116 mm, 39.878 mm, 40.132 mm, 36.83 mm, 37.084 mm, 37.338 mm, 37.592 mm, 40.386 mm, 40.64 mm, 35.814 mm, 36.068 mm, 36.322 mm, 36.576 mm, 38.1 mm, 38.354 mm, 38.608 mm, 37.846 mm, 38.862 mm, 34.798 mm, 35.052 mm, 35.306 mm, 35.56 mm |
3M™ Cold Shrink Quick Splice Kits QSLV-M Series
3M™ Cold Shrink Mine and Portable Splice Kit 8043-1, Max. Cable O.D. 1.80 in (45,7 mm), 1 per case
3M™ Cold Shrink Inline Splice Kits 5730 Series
3M™ PILC Splice Kits