3M™ Rejacketing Sleeves RJS Series
- | Select product options for IDs.
Details
Highlights
- Offers good resistance to moisture, corrosion, ozone and UV rays
- Secures the phase legs of medium-voltage and 3/C shielded power cables
- Designed for use on tape shield, wire shield, armored and non-armored power cables
- Available in different lengths and diameters
- Silicone rubber insulator on inner-expandable polyester braid minimises sliding friction and ensures a leak-proof seal
- Voltages of up to 35 kV or less
3M™ Silicone Rubber RJS Series 3/C Phase Rejacketing Systems are designed to be used in conjunction with 3M™ Terminations to seal the breakout area and rejacket the phases on three conductor cable without grounds.
3M™ Rejacketing Sleeve works in combination with cold shrink breakout boots and silicone rubber terminations. It is ideal for tape shield, wire shield, armored and non armored power cables. The rejacketing sleeves are designed to protect the phase legs from exposure to: moisture, corrosion, ozone, ultra violet radiation and other hazards associated with termination operating environments. Easy to adjust length, the sleeve conforms to varied equipment connections and mounting requirements.
Typical Properties
| Brands | 3M™ |
| Breakout Boot | No |
| Dielectric Strength (V/mil) | 428 V/mil |
| Elongation | 910 % |
| Inner Diameter After Shrink (Metric) | 10.9 mm, 15.2 mm, 20.3 mm, 25.9 mm, 32.5 mm |
| Inner Diameter Before Shrink (Metric) | 15.2 mm, 20.3 mm, 25.9 mm, 32.5 mm, 41.1 mm |
| Insulation Rejacketing | Yes |
| Operating Temperature (Celsius) | 105 |
| Product Colour | Dark Gray |
| Product Type | Splice Jacketing and Rejacketing Kits |
| Solution | utilitybreakout |
| Temperature Rating | 356°F (180°C) Class H |
| Units per Case | 1.0, 3.0, 10.0 |
| Voltage Range | 3.3 - 15 kV, 3.3 - 25 kV, 3.3 - 35 kV, 3.3 - 8 kV |
| Overall Length (Metric) | 1.22 mm, 1219 Metre, 3048 mm |
Resources
RJS Series 3/C Phase Rejacketing SystemData Sheets
(PDF, 578KB)
