3M™ CP2 Press-Fit Header, CP2 Series, CP2-HAB095-A1-KR
- 3M ID 70010022559
Details
Highlights
- Helps achieve high signal density in cost-effective applications
- Modular design (38, 44 and 50 mm modules, 2 mm grid spacing)
- Type AB, 95, 125 signal contacts
- Press-fit pin design helps technicians verify accurate connections
- Three contact mating levels are excellent for early mate/late break or "hot swap" applications
- End-to-end stackable
- Mates with 5-row 3M™ MetPak™ HSHM, UHM and CP2 Sockets
- Available with additional grounding rows for greater ground bounce and EMI control
- Feed through termination available for midplane applications
- For more Information refer to Data Sheet TS2263 (TS-2263)
The 3M™ CP2 Press-Fit Header, CP2 Series helps achieve high signal density in cost-effective applications. Modular headers use a basic unit of 25 mm, and can be designed in versatile 38, 44 or 50 modules with 2 mm grid spacing. Type AB, 95, 110 and 125 2 mm signal contacts feature a press-fit pin design that helps verify smooth and accurate connections. Three contact mating levels make these headers excellent for hot swapping and early mate/late break applications.
End-stackable header mates with 5 row 3M™ MetPak™ sockets. The 3M press-fit header, CP2 series is available with additional grounding rows for greater ground bounce and EMI control, as well as feed through termination for midplane applications.
Specifications
| Brands | 3M™ |
| Connector Style | Pin Header |
| Contact Base Material | Copper Alloy |
| Contact Plating | See Ordering Information |
| Contact Resistance | <= 20 MilliOhms |
| Current Rating | 1.0 |
| Drill Hole Diameter | Ø 0.7 ± 0.02 mm |
| Flammability | UL 94V-0 |
| Hole Platings | Cu 25~50 micrometer, Sn or SnPb<10 micrometer |
| Insulation Colour | Beige |
| Insulation Material | Glass Filled Polyester (PBT) |
| Insulation Resistance | >= 10,000 MegaOhm |
| Mating Contact Finish Material | Gold |
| Mating Contact Finish Thickness (Metric) | 0.76 µm |
| Mating Force | <= 0.75N/PIN |
| Mating and Un-mating Operations | 50 |
| Mounting Type | Boardmount |
| Number of Contact Rows | 5 |
| Number of Contacts | 95 |
| PCB Mounting Style | Through Hole |
| PCB Thickness | 2.4-5.6 mm |
| Packaged Form | Bulk |
| Pitch (Metric) | 2 mm |
| Press-In Force | <= 204N/pin on nominal hole diameter |
| Product Series | CP2 |
| Recommended PCB Plated Through Hole | Ø 0.6 ± 0.05 mm |
| Retention Force | >= 13.5 N/pin on nominal hole diameter |
| Tech Sheet Number | TS-2263 |
| Temperature Rating | -40 Degree C to +85 Degree C |
| Termination Method | Press Fit |
| Test Voltage | 750 VAC (rms) |
| Withdrawl Force | >= 0.15N/PIN |
| Withstanding Voltage | 750 Vrms |
Resources
CP2-HAB110-GA1-XXXX, 3D Step, rev. 013D Models
(ZIP, 1MB)
