3M™ Thermally Conductive Interface Tape 8926 Series
- | Select product options for IDs.
Details
Highlights
- Good thermal conductivity (>1.5W/m-K)
- Excellent dielectric performance
- Low thermal impedance
- Good and reliable adhesion performance to Al and SS
- Vibration damping
- Can be used for heat management
- Can be used for general heat dissipation
- Can be used for bonding / joining parts
3M™ Thermally Conductive Interface Tape 8926 is a pressure sensitive tape designed to have good converting ability, handing and re-workability through the introduction of a thin PET carrier. 3M tape series 8926 is designed with a soft acrylic polymer and multiple thickness options to allow excellent wet-out or conformability to many surfaces.
3M™ Thermally Conductive Interface Tape 8926 has good adhesion performance to many substrate types and has excellent dielectric performance.
Specifications
| Adhesive Type | Acrylic |
| Dielectric Strength | 15 kV, 15 kV/mm |
| Product Colour | White |
| Total Tape Thickness without Liner (metric) | 0.2 mm, 0.25 mm, 0.51 mm |
| Units per Case | 1.0 |
| Overall Length (Metric) | 40 Metre, 80 Metre |
| Overall Width (Metric) | 600 mm |
Resources
Adhensive TDS-3m-thermally-conductive-interface-tape-8926-seriesTechnical Papers
(PDF, 292KB)
Similar products
| Overall Width (Metric) | 600 mm | |
| Total Tape Thickness without Liner (metric) | 0.2 mm, 0.25 mm, 0.51 mm | |
| Overall Length (Metric) | 40 Metre, 80 Metre |
3M™ Thermally Conductive Interface Tape 8926 Series
3M™ Thermally Conductive Interface Tape 8711 SeriesLegal disclaimer
The technical information and data shown on this page should be considered representative or typical only and should not be used for specification purposes. 3M products shown on this website may not be available in all geographic regions or may not be available at this time. Please contact your local sales representative to determine product availability.
