Standard Abrasives™ Aluminum Oxide Flexible Flap Wheel
- | Select product options for IDs.
Details
Highlights
- Flexible flaps provide excellent finish on flat and contoured surfaces
- Coated abrasive flaps clean and deburr inner diameters and contours
- Produces a linear scratch pattern
- Steel mandrel reduces chatter
- Aluminum oxide cuts quickly and suits ferrous and non-ferrous materials
- Available in a broad range of sizes and grades to suit almost any part
Designed to keep dust off the workpiece, the Standard Abrasives™ Aluminum Oxide Flexible Flap Wheel produces a straight line finish on inside diameters or contours. Use this wheel to deburr edges, remove flash, and smooth parting lines. A wide range of diameters with different attachment styles enables consistent coverage on many different workpieces.
Improved Finish and Dust Control on Radiused and Contoured Parts
A flap wheel comes in handy when you're faced with the challenge of cleaning up burrs and parting lines on radiused or specially shaped parts where coated discs are not conformable enough or do not have the necessary reach. We designed our Standard Abrasives™ Aluminum Oxide Flexible Flap Wheel with radiused flaps that, compared to our standard Flap Wheel, provide greater flexibility for improved finishing. The radiused flaps also brush dust away from the contact area for a cleaner work environment.
We offer our Flexible Flap Wheel in smaller diameters for attachment to hand-held tools, and larger diameters for off-hand applications. Some power tools may require an additional reducer bushing or adapter for attaching the wheel.
A broad selection of grades is available to deburr edges, remove flash and parting lines, blend machine marks, apply a linear scratch pattern, or provide light blending, cleaning, or polishing.
Small Wheels Access Inner Radiuses and Maintain Maximum Control
Our wheels with smaller diameters provide access to smaller and harder-to-access inner radiuses or contours on irregular parts. They are especially useful for deburring or finishing the insides of tubing. For these smaller areas, flexible flap wheels provide a softer touch than rolls or bands, which are suitable when more aggressive material removal is required, and produce a softer finish than standard flap wheels.
Our smaller wheels are 1-3˝ in diameter have a 1/4˝ steel mandrel or a 1/4˝-20 threaded steel shank to enable fast yet secure product changeouts. In each case the steel attachment runs the full width of the wheel center, reducing chatter in the rotation. As a result, you get
Typical Properties
Resources
