3M™ Betafine™ PTG Series Filter Cartridge
- | Select product options for IDs.
Details
Highlights
- Advanced Pleat Technology Construction for High Surface Area as compared to competitive filters: higher product throughputs for prolonged service life, lower total filtration operating costs, and lower pressure drops for higher flow rates
- Absolute-rated Filter Performance. Higher product quality and yields
- Graded-porosity Multi-layer Filter Media. Capture of contaminant throughout the filter media to help maximize filter life. Higher contaminant holding capacity
- Polypropylene Construction Free of Adhesives and Surfactants. Very low extractable levels for optimum filtrate purity. Broad chemical compatibility for most aggressive process applications
- 100% Integrity Tested Versions Available. Prequalification and consistency in critical applications. Suitable for final filtration in many applications
This absolute-rated, graded-porosity 100% polypropylene pleated filter features Advanced Pleat Technology (APT) that increases the usable filtration surface area while maintaining standard filter dimensions.
The service life of a pleated filter is often dictated by the accessible surface area. Conventional pleated filters may offer a large gross surface area, but when the media is packed too tightly into the cartridge, only part of the surface area is usable resulting in both flow restrictions and limited contaminant holding capacity. The "blind" or unusable area commonly occurs near the inside diameter where the pleats are packed most tightly. The Betafine PPG and PTG series filter is manufactured using a staggered pleat configuration that, when combined with a novel support material, provides more open space between the pleats.
The APT staggered pleats with increased open area allow for greater contaminant loading between pleats at the inside diameter, while the reduced length pleats take advantage of existing open space closer to the filter's outside diameter. The result is a fully used surface area that provides superior service life.
Specifications
| Applications | Vaccines, Plasma Fractionation, Bulk Chemical Filtration, Final Filtration for Particulates in Soft Drinks, Particle Reduction in Bottle Water Manufacturing, Particle Reduction in Distilled Spirits Filtration, RO Protection and Prefiltration, Solids Removal, Recovery & Reclaim, Solids Removal, Turbidity and Particle Control in Soft Drink Water, Water Filtration for Beer Applications, Water Filtration for Wine Applications |
| Brands | Betafine™ |
| Component and Assembly Materials | Polypropylene |
| Effective Filtration Area (metric) | 2.26 m² |
| End Configuration | Single Open End (SOE), Sanitary Fitting |
| End Modification | 226 O-Ring and Spear, Sanitary Fitting |
| Factory Integrity Tested | No, Yes |
| Gasket/O-ring Material | Silicone |
| Grade | PTG020 |
| Industries | Life Sciences |
| Maximum Operating Temperature (Celsius) | 60 ℃ |
| Media Material | Graded-porosity Polypropylene, Graded Density Polypropylene |
| Media Technology | Non-woven |
| Media Type | Surface |
| Micron Rating (Absolute) | 0.2 Absolute, @ 99.9%, 1.2 Absolute, @ 99.9% |
| Micron Rating (Nominal) | 0 |
| Pleat Type | Advanced Pleat Technology (APT) |
| Product Form | Cartridge |
| Product Series | PTG |
| Product Type | Pleated Polypropylene Media, Filter Capsule |
| Recommended Change-out Differential Pressure (Metric) | 2.4 bar @ 25°C |
| Series | Betafine™ PTG Series |
| Units per Case | 1.0, 6.0 |
| Overall Diameter (Metric) | 7.1 cm |
| Overall Length (Metric) | 50.8 cm, 76.2 cm |
| Overall Width (Metric) | 7.62 cm |
