3M™ Thin-Wall Heat Shrink Tubing EPS-300
- | Select product options for IDs.
Details
Highlights
- Balances electrical, physical and chemical propertiesfor various industrial and military applications
- Offers shrink-fit protection and strain relief of wires, solder joints, terminals and connections
- Suitable for lightweight wire-harness covering, fire-resistant covering, wire marking, wire bundling and component packaging
- Made of flexible polyolefin
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- Flame-retardant tubing is rated for 600V applications
3M™ Heat Shrink Tubing EPS-300 is a 3:1 thin-wall tubing offering the advantages of integral adhesive-lined construction.
3M™ Heat Shrink Tubing EPS-300 is colour coded for quick and easy identification of the wire. It provides a skintight fit and strain relief protection for electronic components, wire splices, wire bundles and harness breakouts. This flame retardant tubing has a heat shrinkable outer wall that is irradiation cross linked for abrasion resistance and helps to maintain the high flow as well as good adhesion characteristics. When the tubing cools down, it forms a permanent, water resistant barrier. It withstands a wide temperature range of 67 to 230 degrees F ( 55 to 110 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
Typical Properties
| Adhesion to Steel oz/in (N/100 mm) | 40 (44) |
| Adhesive Material | Silicone |
| Application Specifications | ABS |
| Dielectric Strength (V/mil) | 500 V/mil |
| Electrolytic Corrosion Factor | 0.9 |
| Elongation | 450 %, 450 %, 450 Decibel |
| Expanded Inner Diameter (metric) | 3.2 mm, 4.8 mm, 6.4 mm, 7.62 mm, 9.5 mm, 12.70 mm, 19.1 mm, 25.40 mm, 38.10 mm, 38.1 mm |
| Flame Retardant | Yes |
| Flammability Rating | UL 224 All Tubing Flame Test [jacket], UL 224 All Tubing Flame Test |
| Heat Shrink Type | Adhesive-Lined Polyolefin Heat Shrink Tubing |
| Inner Diameter After Shrink (Metric) | 1.02 mm, 1.57 mm, 1.6 mm, 3.05 mm, 3.18 mm, 3.81 mm, 4.06 mm, 6.35 mm, 8.13 mm, 12.7 mm, 12.95 mm |
| Inner Diameter Before Shrink (Metric) | 3.18 mm, 4.75 mm, 4.8 mm, 6.35 mm, 7.62 mm, 9.53 mm, 12.7 mm, 19.05 mm, 25.4 mm, 38.1 mm |
| Lubricant Type | Gel |
| Material | Polyolefin |
| Maximum Operating Temperature (Celsius) | 110 ℃, 150 ℃, 200 ℃ |
| Minimum Expanded Tubing I. D. | 0.125 in, 0.187 in, 0.25 in, 0.3 in, 0.375 in, 0.5 in, 0.75 in, 1 in, 1.5 in |
| Non-Corrosive | Yes |
| Operating Temperature (Celsius) | -55 °C to 110 °C |
| Operating Temperature Range (Celsius) | -55 °C to 110 °C, -55 °C to +175 °C |
| Product Colour | Transparent, Red, Black |
| Recovered Inner Diameter (metric) | 1 mm, 1.02 mm, 1.6 mm, 2 mm, 3.1 mm, 3.81 mm, 4.1 mm, 6.4 mm, 8.1 mm, 13 mm |
| Shrink Ratio | 3:1 |
| Solution for | Wireless Network: Infrastructure Accessories, Access Network: xDSL, Access Network: FTTH/FTTB/CATV, Longhaul/Metro Loop Network: CO/POP, Wireless Network: Backhaul, Longhaul/Metro Loop Network: Outdoor |
| Tubing Type | Dual Wall (Adhesive Lined) |
| UL File Number | E-157227 |
| Units per Box | 10 |
| Units per Case | 3.0, 5.0, 10.0, 12.0, 24.0, 25.0, 42.0, 45.0, 75.0, 125.0, 200.0, 250.0 |
| Overall Length (Metric) | 152 mm, 1219 mm |
Resources
3M™ Heat Shrink Tubing EPS-300Data Sheets
(PDF, 60KB)
3M™ Heat Shrink Tubing FP-301Data Sheets
(PDF, 62KB)
Similar products
| Inner Diameter After Shrink (Metric) | 1.02 mm, 1.57 mm, 1.6 mm, 3.05 mm, 3.18 mm, 3.81 mm, 4.06 mm, 6.35 mm, 8.13 mm, 12.7 mm, 12.95 mm | |||
| Inner Diameter Before Shrink (Metric) | 3.18 mm, 4.75 mm, 4.8 mm, 6.35 mm, 7.62 mm, 9.53 mm, 12.7 mm, 19.05 mm, 25.4 mm, 38.1 mm | |||
| Maximum Operating Temperature (Celsius) | 110 ℃, 150 ℃, 200 ℃ |
3M™ Thin-Wall Heat Shrink Tubing EPS-300
3M™ Heat Shrinkable Splice Jacket Kit HSJ
3M™ Heat Shrink Tubing HDCW
3M™ Heat Shrink Heavy-Wall Cable Sleeves ITCSN