3M™ Motor Lead Pigtail Splice Kits 5321-5324
- | Select product options for IDs.
Details
Highlights
- Fast and simple installation
- No torches or heat source needed to install
- Thick walls to resist puncture and abrasion damage
- Easy re-entry
- Contains all materials required to make three splices (excluding lugs)
- Rated for 5/8 kV applications
- Includes 3 pigtail lug covers, 3 rolls Scotch® Stress-Control Tape 2200, 9 mastic sealing strips, 3 instruction sheets and more
- Withstands temperatures of 194 degrees F (90 degrees C)
- RoHS 2011/65/EU Compliant
The 3M™ Motor Lead Pigtail Splice Kit makes three splices. Lugs are not included in kits. Feeder of 8-4 AWG (10-16 sq mm), motor lead 10-4 AWG (6-16 sq mm).
3M™ Motor Lead Pigtail Splice Kits are designed for splicing motor lead cables to incoming feeder cables. These kits can accommodate pigtail (stub) connections of 5/8 kV with shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM rubber. A mastic strip is used for the moisture seal. These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M™ Motor Lead Splicing Kits. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series or other UL listed copper lugs, can be used (not included). Each kit contains: 3 pigtail lug covers, 2 cold shrink tubes, 9 mastic sealing strips, 3 rolls of Scotch® Stress Control Tape 2200, 3 bags of solvent cleaning cloths, 3 tubes of silicone grease, 3 rolls of Scotch® Linerless Rubber Splicing Tape 130C, 3 instruction sheets.
Typical Properties
| Cable Type | Polymeric insulated cables |
| Connection Type | Pigtail (Shielded), Pigtail (Non-shielded) |
| Indoor/Outdoor | Indoor |
| Insulation Outside Diameter | 0.53-0.88 Inch, 0.30-0.51 Inch, 0.43-0.65 Inch, 0.75-1.12 Inch |
| Insulation Outside Diameter Range (metric) | 13.5-22.4 mm, 1.90 - 28.4 mm, 7.6-13.0 mm, 10.9-16.5 mm |
| Lug Cover Length (metric) | 228.6-254.0 mm, 266.7-292.1 mm, 177.8-203.2 mm, 203.2-228.6 mm |
| Lug/Stem Connector Included in Kit | No |
| Maximum Bolt Length (metric) | 12.7 mm, 19.1 mm, 31.8 mm, 38.1 mm |
| Maximum Feeder Lead Size | 4 AWG, 1/0 AWG, 250 kcmil, 500 kcmil |
| Maximum Motor Lead Size | 4 AWG, 1/0 AWG, 250 kcmil, 500 kcmil |
| Maximum Voltage | 8 kV |
| Number of Conductors | 1 |
| Number of Skirts | 0 |
| Range Feeder Cable (AWG & kcmil) | 8-4, 2-1/0, 1/0-250, 250-500 |
| Shielding Type | Non-shielded |
| Splice Type | Pigtail Only |
| Units per Case | 1.0 |
| Voltage | 5 kV - 8 kV, 5/8 kV |
Resources
Motor Lead Splicing Kits 5300 SeriesData Sheets
(PDF, 79KB)
Similar products
| Maximum Voltage | 8 kV | |||
| Shielding Type | Non-shielded | |||
| Splice Type | Pigtail Only | |||
| Maximum Motor Lead Size | 4 AWG, 1/0 AWG, 250 kcmil, 500 kcmil | |||
| Maximum Feeder Lead Size | 4 AWG, 1/0 AWG, 250 kcmil, 500 kcmil |
3M™ Motor Lead Pigtail Splice Kits 5321-5324
3M™ Motor Lead Inline Splice Kits, Non-Shielded and Shielded Cables, 5331- 5334
3M™ Motor Lead Inline Splice Kits 5311–5314