3M™ PELTOR™ X5A/37274(AAD) Over-the-Head Earmuffs, 10 ea/Case
- 3M ID XA007707871
Details
Highlights
- Reduces noise levels up to 37 dB
- Wide flat headband is electrically insulted making the earmuffs electrically resistant or 'dielectric'
- Colour-coding makes it easy to identify the level of protection being worn
- Large cups are still lightweight
The 3M™ PELTOR™ X Series Ear Muffs X5A is a high performance hearing protector offering 37(dB) attenuation for use against extremely high noise environments, which often require double protection. Despite the larger cups the ear muffs remain relatively lightweight with excellent balance and wearer comfort.
The X-Series earmuffs are 3M’s latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X5A earmuffs offer the highest NRR (31 dB) for an earmuff on the market which makes them ideal for very high noise situations. The high attenuation delivered by X5A earmuffs is possible as a result of a combination of advanced technologies including: newly designed spacers, specially formulated earcup liners and innovative foam contained in the cushions. It features an electrically insulated wire headband, often referred to as “dielectric”.
- The wire headband offers consistent pressure over prolonged wearing periods
- Earcup pivot points tilt for optimum comfort and efficiency
- Replaceable ear cushions and foam liners (hygiene kit HYX5)
- Noise Reduction Rating (NRR)b 31 dB. CSA Class AL
NOTE: The X-Series (over-the-head) headband version is electrically insulated -sometimes referred to as ”dielectric”. The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.
*The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
Hearing Protection Solutions Made Innovatively Easy™.
- The wire headband offers consistent pressure over prolonged wearing periods
- Earcup pivot points tilt for optimum comfort and efficiency
- Replaceable ear cushions and foam liners (hygiene kit HYX5)
- Noise Reduction Rating (NRR)b 31 dB. CSA Class AL
NOTE: The X-Series (over-the-head) headband version is electrically insulated -sometimes referred to as ”dielectric”. The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.
*The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.
Hearing Protection Solutions Made Innovatively Easy™.
Typical Properties
